Yaesu FT-1000MP Mark-V

FT-1000MP
Yaesu FT-1000MP Mark-V

FT-1000MP Mark V Specifications:

General
RX Frequency Range:
100 kHz ~ 30 MHz
TX Frequency Ranges:
160 ~ 10 m (Amateur bands only)
Frequency Stability:
±0.5 ppm (after 1 min. @ 25 °C)
±0.25 ppm (after 1 min. @ 25 °C, w/TCXO-6)
Operating Temperature Range:
-10 °C ~ +50 °C
Emission Modes:
LSB, USB, CW, FSK, AFSK, AM, FM
Frequency Steps:
0.625/1.25/2.5/5/10 Hz for SSB,CW, RTTY & Packet
100 Hz for AM and FM
Antenna Impedance:
16.6 ~ 150 Ohms, unbalanced (Tuner ON, TX only)

Power Consumption:
13.8 VDC 30 VDC
RX (no signal)
2.3 A -
RX (signal)
2.7 A -
TX (200 W)
2.2 A 14.5 A

Supply Voltage:
30 VDC and 13.8 VDC (FP-29)
Dimensions (WHD):
16" x 5.3" x 13.7" (410 x 135 x 347 mm)
Weight (approx.):
31 lbs. (14 kg.)
Transmitter
Power Output:
Adjustable up to 200 watts (50 watts AM carrier),
Class A mode (SSB):
75 watts maximum
Duty Cycle :
100% @ 100 watts,
50% @ 200 watts (FM & RTTY, 3-minute TX)
Modulation Types: SSB:
J3E Balanced,
AM:
A3E Low-level (early stage),
FM:
F3E Variable reactance,
AFSK:
J1D, J2D Audio frequency shift keying
Maximum FM Deviation:
±2.5 kHz
FSK Shift Frequencies:
170, 425 and 850 Hz
Packet Shift Frequencies:
200 and 1000 Hz
Harmonic Radiation:
Better than -60 dB (Typical)
SSB Carrier Suppression:
At least 40 dB below peak output
Undesired Sideband Suppression:
At least 55 dB below peak output
Audio Response (SSB):
Not more than -6 dB from 400 to 2600 Hz
3rd-order IMD:
- 31 dB @ 200 watts PEP, or better
(Class A mode) - 50 dB @ 75 watts PEP (Typical)
Microphone Impedance:
500 to 600 Ohms
Receiver
Circuit Type:
Quad-conversion superheterodyne (triple conversion for FM)
Intermediate Frequencies:
Main RX:
70.455 MHz/8.215 MHz/455 kHz,
Sub RX:
47.21 MHz/455 kHz

Sensitivity:
Modes
0.5 - 1.8 MHz 1.8 - 30 MHz
SSB/CW (2.0 kHz)
2 uV 0.16 uV
AM (6 kHz)
13 uV 2 uV
FM
- 0.5 uV
(with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD, 0 dB u = 1 uV)

Selectivity (-6/-60 dB) :
BandWidth
Modes Min. -6 dB BW Max. -60 dB
BW
2.4 kHz
all except FM 2.2 kHz 4.2 kHz
2.0 kHz
all except FM 1.8 kHz 3.6 kHz
500 Hz
CW/RTTY/Packet 500 Hz 1.8 kHz
250 Hz
CW/RTTY/Packet 250 Hz 700 Hz
AM (Wide) 4 kHz 14 kHz
FM 8 kHz 19 kHz

IF Rejection (1.8 ~ 30 MHz):
80 dB or better (Main RX), 60 dB or better (Sub Rx)
Image Rejection (1.8 ~ 30 MHz):
80 dB or better (Main), 50 dB or better (Sub)
Maximum Audio Output:
2.0 W into 4 Ohms with <10 % THD
Audio Output Impedance:
4 to 8 Ohms
FP-29 Specifications:
DC Output Voltage/Current:
+30 V: 15 A; +13.8 V: 3 A
Input Voltage:
AC 100-120 V, 50-60 Hz
AC 200-240 V, 50-60 Hz
Current Consumption (Approx.):
AC 100-120 V: 9 A, AC 200-240 V: 5 A
Operating Temperature Range:
-10°C~ +50°C
Case Size (W x H x D):
4.2"x 5.3"x 13" (106 x 135.5 x 331 mm)
Weight (Approx.):
7 lbs.(3.2 kg.)